Continuous cycle spraying and mixing pump. Suitable for the application of all the premixed products contained in bags, with a particular aptitude for the application of structural mortars, dehumidifying materials and products for smoothing thermal insulation panels.
Data sheet
Standard Equipment
- D5-2.5 Monoflex Stator and Rotor (purple)
- Direct connection for material hose DN 35 F
- Material delivery pressure gauge
- Control panel with IMER A1 inverter
- 6 selectable speeds in Dry Mode
- Pumping speed progressive adjustment in Wet Mode
- Interactive display with alphanumeric codes
- IM250 diaphragm compressor on board (Koine 3.1)
- Fini VKM 402 piston compressor on board (Koine 3.1 Coat)
- Calpeda NGX2 self-priming stainless steel electropump
- Water system with flow meter and antifreeze discharge
- 20 m electric cable with 16 A plug
- 20 m water hose Ø 19 mm
- 16 m air hose Ø 13 mm
- 15 m material hose Ø 25 mm
- DN 25 gun for premixed with deflectors (Koine 3.1)
- Gun for smoothing with deflectors + DN 25 gun (Koine 3.1 Coat)
- Accessory box complete with washing accessories
Applications
Suitable for the application of:
Dry premixed materials (Dry mode)
- Mortars for gluing and smoothing thermal insulation panels
- Mortars for concrete / lime based structural reinforcement
- Restoring / dehumidifying mortars for masonry walls
- Binders / mortars for consolidation injections
- Lime / cement / gypsum based plasters
- Lime / cement / gypsum based smoothers
- Insulating plasters based on polystyrene or cork
- Cement / anhydride based self-levelling screeds
- Fireproofing mortars
Wet materials (Wet mode)
- Finishing coatings, mineral smoothers with silicates or quartz
- Waterproofing products, even fiber-reinforced
- Smoothers for elastomeric / water-repellent finishing
- Binders / mortars for consolidation injections
- Mortars for grouting /spacing