IMER Group

Prestige

Plaster sprayer with Diesel engine for dry premixed materials. ECO TPOWER system adjusting revolution number according to working phase. Mixer capacity: 180 l

Product sheet

Gallery

New Category

Joomla Gallery makes it better. Balbooa.com

Accessories

New Category

Joomla Gallery makes it better. Balbooa.com

Data sheet

Standard Equipment

Diesel engine 14.5 kW Yanmar 3 TNV76-NYE3D Stage 5
Variable flow hydraulic pump
Compressor 400 l / min
Tipper mixer
2L6 screw pumping unit
10 + 20 m Ø 35 material hoses
5 m Ø 25 connecting hose with Ø 25 M - Ø 35M coupling
16 + 20 m air hose Ø 13
Ø 25 gun with no spreading valve and air flow regulator
Box with cleaning and maintenance accessories
1 hose holder band
Rotor-Stator pressure calibration group
2 cleaning sponge balls
Drawbar, safety pull rope and towing ball hitch D 50 mm
Taillight, rear fog light, reversing light and indicator lights
Amortized axle with tubeless tires and mudguards
EU approved road-towing

Applications

Suitable for mixing and spraying plastering mortars in bags or from silo:
• Traditional lime / cement plasters
• Premixed/pre-dosed plasters based on cement/lime/colored plaster (Monokote)
• premixed / pre-dosed structural plasters
• premixed / pre-dosed restorative plasters
• Insulating plasters based on polystyrene or cork
• Mortars for grouting
• Adhesives for thermal insulation coatings
• Waterproofing seal (only for large surfaces)
• Mortars for fiber-reinforced reinforcement
• Masonry mortar
• Binders / mortars for consolidation injections
• Filling grout with metal fibers / polypropylene / carbon / glass
• Fiber-reinforced concrete (grain size max. 10 mm)
• Self-levelling cement / anhydride based screeds
• Lightweight polystyrene-based screeds
• Fireproofing
• Refractory mortars (wet only)
• Shotcrete

Prestige | EN - Intonacatrici